We tried to do the firmware update remotely, but the camera is refusing to download the firmware from a remote server. You can try to upgrade it over the local network through Telnet. To do this, you will need to follow these steps:
Step 1
Download and install a TFTP server. You can use any TFTP server software you prefer. Here is a link to download simple TFTP server software↗️.Step 2
Please try to upgrade the camera using this firmware↗️.Step 3
You will need to unpack the firmware from the archive and put all the files from the archive into a single folder. Make sure there are no other files in this folder.Step 4
Using the TFTP software, start the TFTP server and point it to the folder that contains the unpacked firmware.Step 5
Connect to the camera using Telnet. To log in to the camera, use the following credentials:- Username:
root - Password:
uniview
Step 6
To update the firmware, use the following command:update -tftp 192.168.2.250 all -f
Replace 192.168.2.250 with the IP address of the computer on which the TFTP server is running.